Application: pneumatic actuators with NAMUR connection
General Data
| Type: | V-Soleniod |
| Material: | PA (Reinforced Polyamide),Chrome-plated brass thread |
| Gaskets: | Viton (NBR O-Ring exhaust) |
| Protection class: | IP65 |
| Operating pressure: | 2,5 to 8bar |
| Flow: | Cv: 1,1 (1100l/min) |
| Connection: | NAMUR and 1/4" |
| Function: | 3/2 and 5/2 way, monostable |
| Local Control: | Yes |
| Temperature: | -40ºC to +60ºC |
| Control air: | Compressed air with or without oil, instrument air, nitrogen |
| Options: | Silencers (1/8") |
| Throttle valve w/filter | |
| ATEX version | |
| Version in stainless steel with threaded connection |
| DIMENSIONS (mm) | WEIGHT | |||
|---|---|---|---|---|
| Item no. | Zone | Voltage | Consumption | kg |
| 40302031 | Safe | 24VDC | 4,8W | |
| 40306000 | Safe | 240VAC (50/60Hz) | 8,5/6,9VA | |
| 40306001 | Safe | 120VAC (50/60Hz) | 8,5/6,9VA | |
| 40302032 | Safe | 24VAC (50/60Hz) | 8,5/6,9VA | |
Solenoid valves are used to control single and double-acting pneumatic actuators with NAMUR VDE connection. The solenoid valve changes position when voltage is applied to the coil. The type shown here is monostable, which means a spring returns it to its original position when the voltage is removed. Bistable types with 2 coils can be supplied for situations where you want the valve to remain in its position in the event of a power failure.
Read more about the individual solenoid valves with NAMUR connection by clicking on the products below.